KM3NeT - Blog

KM3NeT blog posts

Handin Tide left the harbour of Malta

10 September 2021 – the Handin Tide left the port of Malta around 5 p.m. CEST.

The navigation to the KM3NeT site is estimated to take about 10 hours.

The weather forecast is good. The activity on site will start early morning tomorrow.

Keep following the  ARCA-blog.


Liveblog about the sea ARCA campaign of September 2021

09 September 2021 – KM3NeT is getting ready for a new sea operation at the ARCA site near Sicily, Italy.

Five new detection units for ARCA are ready to board the ship in the harbour of Malta.
The ship is scheduled to set sail in the evening of 10 September 2021.

We will report on this operation with posts in the social media and in this liveblog.

 


KM3NeT at ICRC2021

29 July 2021 – The International Cosmic Ray Conference (ICRC) has come to an end after two intense weeks.

The biannual conference organised under auspices of IUPAP, the International Union of Pure and Applied Physics. This year, the 37th edition of the conference was organised as an online version by DESY Zeuthen in Germany. The KM3NeT Collaboration participated in the conference with many contributions accepted by the International Science Committee of the conference.

Paschal Coyle, Spokesperson of the KM3NeT Collaboration, was invited to present a review talk on underwater neutrino telescopes, including obviously KM3NeT, but also its older sister ANTARES, the GVD telescope in Lake Baikal in Siberia, Russia and the new initiative P-ONE offshore the coast of Canada in the Pacific Ocean:

   

Five more talks covered the very first results obtained with ORCA and ARCA, as well as the prospects for neutrino oscillation measurements and mass ordering determination. With only 6 detection units ARCA6 sees candidates for atmospheric neutrinos; with only 6 detection units ORCA6 sees the effect of oscillation:

In addition, more than 20 poster contributions were presented by the members of our Collaboration. Among them, Thijs van Eden and Jordan Seneca, two PhD students at Nikhef, Amsterdam, who were awarded the best poster prize for their contribution discussing reconstruction of single and double cascade in KM3NeT. Congratulations Thijs and Jordan!

  

 


In memoriam

Giorgos Androulakis

(1978 – 2021)

 

With shock and great sadness the KM3NeT Collaboration learned that our colleague and dear friend Giorgos Androulakis passed away suddenly on the 9th of July 2021, aged 43.

 

Giorgos joined KM3NeT in 2014 as a member of the NCSR “Demokritos” in Athens, Greece and from the start he became deeply involved with the construction of the detectors. In 2017, he took over as the QA/QC Manager of the Collaboration, coordinating the activities for quality control during detector construction and operation and managing a team of local quality supervisors at the institutes involved in the detector construction. He was a key long-term member of the KM3NeT Management Team and the Steering Committee.

Giorgos was unfailing in his help to the institutes when setting up their facilities for the detector construction, to help understand the origin of problems when they arose, and to support people with the intricacies of the database. On the management side his careful following of non-conformities and probing questions would often lead us to an understanding and a solution for the issue of the day. His logical approach, insight and sage advice was invaluable for many important decisions.

The recent successes of the collaboration in the construction of the seafloor infrastructures and detection units owes so much to his skills, dedication and hard work.

Giorgos was greatly appreciated by all the members of the collaboration; he was the oil that kept us all moving smoothly in the right direction. Many of us mourn a good friend. Personally, I will certainly miss our discussions over a few beers after a hard day at the Collaboration meeting and especially his unique and ironic sense of humour.

 

On behalf of the KM3NeT Collaboration I would like to express our sincere condolences to his family and friends at this difficult time.

 

We will miss him dearly.

 

Paschal Coyle, Spokesperson KM3NeT Collaboration

 


Yet another virtual spring meeting

A few weeks ago, KM3NeT held its two-week long spring meeting, once again virtually, like almost all meetings nowadays.

With twelve detection units operating in the ARCA and ORCA detectors, it was a joy to discuss the progress of the data analysis groups and prepare for the reports at the summer conferences. With our smooth network of almost twenty production sites new detection units are being prepared at the maximum speed that the COVID-19 restrictions allow. New deployment campaigns are in preparation.

Although at a distance, we felt close to each other thanks to the virtual coffee breaks in the gather town set up by our colleagues of Laboratoire de Physique Corpusculaire de Caen (many thanks!). We concluded the meeting with an exciting quest to fix the unexpected problems found in a virtual shift room: this was a run against the clock to find out the password to get free from the locked room and reconvene for a final party at the bottom of the sea – real shifts won’t ever be so hilarious!

As usual, the meeting was also the occasion to welcome the many newcomers and to remind the accomplishments of those that are leaving the collaboration for a next step in their professional career. Thanks a lot for your work for KM3NeT. We wish you all the best and success in your  new working environment!

We sincerely congratulate Diego Real whose PhD thesis was recently awarded an important prize of the Spanish Society of Astronomy!

We were pleased to welcome new teams from the University of Toulon and Institut de Ciències del Mar in Barcelona – both aim at new investigations in the deep-sea environment and have already collaborated with the ANTARES telescope and the NEMO pilot project in the Mediterranean.

Among the new activities announced at the meeting: an Open Science Committee has been established, while the representatives of our early-career-scientists put forward a plan for making the life of our youngest collaborators easier even in these difficult times.

It was a fruitful and pleasant meeting!

The call for an institute to organise the next Collaboration meeting in the fall has been opened – hopefully the next meeting will be in person?


New publication: Neutrino Mass Ordering and Oscillation Parameters

05 May 2021 – The potential of KM3NeT to measure key properties of neutrinos – in March 2021, the KM3NeT Collaboration released a publication showing that  KM3NeT with its ORCA detector will be in an excellent position to study the phenomenon of neutrino oscillations!

Three neutrino flavours and oscillation

Neutrinos come in three species called flavours: the electron neutrino, the muon neutrino, and the tau neutrino. In the 1960’s, the first experiment was started to study the sun by measuring the flux of electron neutrinos that the solar nuclear processes copiously produce. The experiment revealed that the flux was inconsistent with the expectations! Many solutions were put forward to explain the discrepancy until a measurement of the flux of neutrinos of all three flavours was made and found compatible with the expectation. This key measurement meant that the expectations for the neutrino flux produced by the sun were correct and that the electron neutrinos were converted into other flavours while traveling to Earth. This phenomenon is called neutrino oscillation, subsequently detected also in other contexts. This phenomenon is only explained by quantum mechanics and requires that the neutrinos, initially thought massless, are actually massive!

Neutrino admixture

The neutrinos with definite masses happen to be different from the neutrinos with definite flavours. In other words, a neutrino of a given flavour is an admixture of the neutrinos of definite mass as shown in the top part of fig:1. Because of the mass difference between the neutrino mass states, these states do not propagate at the same velocity. As a result, the neutrino admixture evolves during the propagation, as shown in the bottom part of fig:1. In other words, while propagating, the neutrino flavour changes.

 

Figure 1: Top:the mass state admixtures corresponding to the flavour (so-called weak) states for 2 neutrinos. Middle: a muon neutrino is produced at t=0. As time goes, the neutrino mixture varies reaching periodically a pure muon neutrino state. The probability for the neutrino to be detected in each flavour is represented at the bottom. Reproduced from Slansky et al. Los Alamos Sci. 25 (1997) pp. 28-63.

Using atmospheric neutrinos

The KM3NeT Collaboration aims to study this oscillation phenomenon using neutrinos produced in the collisions of cosmic rays onto the atmosphere. Using these neutrinos, the KM3NeT Collaboration will be able to measure one of the key parameters ruling the neutrino admixture: the so-called θ23 mixing angle. We will also be able to measure the squared mass difference between two of the neutrino mass states – δm232 – and to tell which of the three mass states is the heaviest, i.e. determining the neutrino mass ordering as shown in fig:2. Finally, we will check if the standard three neutrino oscillation paradigm is valid by measuring the fraction of cosmic-ray induced neutrinos that have oscillated to the tau neutrino.

Figure 2: Sensitivity to neutrino mass ordering as a function of data taking time for both normal (red upward pointing triangles) and inverted ordering (blue downward pointing triangles). See the paper for more details and the values of the oscillation parameters considered to obtain the result.

Unique potential

The publication relies on precise simulations to determine the sensitivity of the KM3NeT/ORCA detector to these parameters. The prospects show that the experiment has a unique ability to make these measurements and that world best results can be obtained in few years of data taking with the full detector.

The publication has been submitted to EPJ-C and is available as a pre-print as arXiv:2103.09885.

 


New publication:  core-collapse supernova explosions

11 March 2021 – In February 2021, the KM3NeT Collaboration released a publication describing the potential of KM3NeT to detect low-energy neutrinos from a future core-collapse supernova. The publication is submitted to the European Physical Journal  C.

What is a core-collapse supernova?

Core-collapse supernovae  are very energetic explosions that can end the life of massive stars. They have the peculiar feature of releasing about 99% of their energy as a huge flux of low-energy neutrinos. The neutrinos can escape the stellar core carrying information on the physical processes at play in the collapse, when the star is still opaque to light.

How well can KM3NeT observe a core-collapse supernova?

Thanks to the technology of KM3NeT based on the multifaceted modules with light sensors the KM3NeT detectors are particularly sensitive to the low-energy neutrinos from a supernova.  In the publication it is shown that KM3NeT  – when finished building the detectors –  can reach a 5 sigma discovery potential to observe a core-collapse supernova happening in the Milky Way. For the most optimistic theoretical models describing core-collapse supernovae, the detection threshold can extend up to the Large Magellanic Cloud.

The potential sensitivity of the KM3NeT detectors with 230 detection units in the ARCA detector and 115 units in the ORCA detector as a function of distance of the core-collapsed supernova. Curves are shown for three different masses of the progenitors.

Details

Once a core-collapsed supernova is observed, researchers of KM3NeT can study aspects of the neutrino emission such as the detected neutrino light curve and the neutrino spectrum. This will provide the potential for discrimination between different theoretical models of core-collapse supernovae and help to understand the physical processes behind the explosion mechanism. The time of arrival of the neutrino signal can be determined with an accuracy better than 10 ms for a source at the Galactic Center. The oscillating signature of hydrodynamical instabilities and other physical processes impacting the neutrino time profile can also be detected for nearby events: 3 sigma at 3-8 kpc, depending on the model. From the recorded coincidences, KM3NeT will be able to infer the properties of the neutrino spectrum, estimating the mean neutrino energy with a precision of about 2% if the other spectral parameters such as the energy scale and pinching parameter are known with a small uncertainty.

Neutrino light curves expected using the future full ARCA detector of 230 detection units, from a core-collapse supernova at a distance of 5 kpc and a progenitor of 27 solar masses.

What is possible with the current six detection units of the ORCA detector?

Already with the six detection units of the ORCA detector currently taking data, a detection at 5 sigma level of a core-collapse supernova can be achieved for supernovae at distances up to 10 kpc. The online analysis pipeline is in place, sending warning messages to SNEWS  – the worldwide network  for early warning for supernova events. The first MeV neutrino follow-ups of warnings by gravitational-wave detectors were performed using the data of only four ORCA detection detection units  that were active at that time, bringing the first KM3NeT physics results.

 

Exciting times are ahead. KM3NeT is ready for the observation of the next core-collapse supernova event in our Galaxy!


A collaboration in corona times

18 February 2021 – Like everyone else the KM3NeT Collaboration has to follow the restrictive measures against the COVID-19 pandemic. So, once more, the last two weeks we held our Collaboration meeting on-line. At this virtual meeting we discussed the many details of building the telescopes, analysing the data and developing the simulation programs.  We are very encouraged by the large progress with constructing the many detector components and the installation of the ARCA and ORCA telescope infrastructures. We are excited by the many analyses of data from the installed detector units on which we will  report at the upcoming conferences. Nevertheless, we  tremendously miss our colleagues.  In particular, for the young scientists in our Collaboration these are difficult times, but they are amazing in their efforts for the Collaboration.

During the Collaboration meeting we virtually said goodbye and thank you to Marco Anghinolfi, who will be retiring soon after many years of service to the Collaboration.  We hope you enjoy your retirement. Arrivederci, but no goodbye!

We virtually raised a glass to thank Mauro Taiuti for his four years of leadership as Spokesperson of KM3NeT. Fortunately, he has promised to continue his scientific career in the Collaboration!

We are looking forward to the new leadership of Paschal Coyle and his team. All the best for executing the tremendous task ahead of building the telescopes and executing the scientific program – also in corona times. We will do our best to support you!

We virtually applauded our PhD students who have recently completed their theses and wished our postdocs leaving the Collaboration all the best for their careers!

We virtually welcomed new students and postdocs who will work on the nitty gritty of data analysis and detector calibration. We hope to meet you face-to-face very soon!

Last but not least, we  virtually welcomed LPC Caen, France as a new group in the collaboration who  will participate in both the construction work and the scientific program. Super!

On the bright side of virtual meetings our conference committee reported a more diverse participation of our Collaboration in the international conferences. More people took part and the representation among speakers was better balanced in seniority and gender.

Building and operating a telescope is an attractive, tremendous, collaborative effort relying on  a lot of human interaction, hard to recreate in a virtual environment – but we did our best! We were still able to generate our customary  Collaboration group picture as you can see below: a collaboration in corona times.

 

 


New paper: Deep-sea deployment of the KM3NeT neutrino telescope detection units by self-unrolling

20 November 2020 – The KM3NeT Collaboration has published a new paper, in which we describe in detail the innovative deployment method for KM3NeT detection units.

No standard moorings

A custom design was necessary, because the KM3NeT mooring – the detection unit -is different from moorings typically used for oceanography.

For instance, in KM3NeT moorings the instrumentation is contained in transparent and thus unprotected glass spheres. That makes them vulnerable during deployment. Moreover, we use a long, thin and soft tube with optical fibres and thin copper wires for data transmission and electrical power for the instruments. That makes the units even more vulnerable.

On top of that, because we use thin Dyneema ropes as strength members in stead of a standard steel cable the mooring is not strong enough to carry the weight of the anchor during deployment.

All this makes it more difficult to deploy the unit without breaking it and we needed a customised deployment method.

Different from other telescopes

Compared to other neutrino telescopes such as ANTARES in the Mediterranean Sea and GVD in Lake Baikal, we designed the KM3NeT detection unit even more slender to minimise the amount of material used for support of the sensor modules. An other – economical – difference is that we have to deploy hundreds of units more for KM3NeT in a period of a few years while keeping the costs for sea operations at a minimum. These are even more reasons for innovation of the deployment method.

The LOM

We developed a custom-made, fast deployment method. Despite the length of the detection unit of several hundreds of metres, we managed to compact it into a small, re-usable spherical launching vehicle instead of deploying it weight down from a surface vessel – the standard method in oceanography. We dubbed the vehicle LOM for Launcher of Optical Modules.

The tric

Once the LOM has reached the seafloor, the innovative tric begins. The buoyant LOM rolls upwards along the Dyneema ropes. While doing so, it spits out the glass spheres with instrumentation attached to the ropes. As a result, while floating to the surface, the LOM leaves the detection unit behind at the seabed, unfurled to its full vertical length. Ready for data taking during many years to come.

Cost effective

The LOM has two economical advantages. First, it does not take a lot in space. Therefore, during a sea operation many LOMs can be stored on deck of a ship. Secondly, we can lower the LOM to the seabed at high speed. As a result, we need less expensive ship time for the installation of the KM3NeT telescope.

Cooperation

As far as we know, the method of compact deployment of moorings with a LOM is unique. The method is the result of close cooperation between engineers and scientists in the KM3NeT Collaboration from both oceanographic and astrophysics institutes. We hope it will inspire oceanographic scientists for the design and deployment of their future moorings.

Details

In the paper, we describe the details of the design of the LOM, the loading with a detection unit, and its underwater self-unrolling. You find the reference below.

LOM in pictures

Pictures below reflect the  process from idea to realisation. First an impression of the initial ideas for deployment by @Marijn van der Meer/Quest. Followed by the technical design of the KM3NeT detection units that must be installed and the design of the LOM launcher vehicle. Finally, photos of the first prototype of the LOM and the final version that is now regularly used for the installation of the detection units of the ARCA and ORCA detectors of the KM3NeT telescope.

 


 

Reference

Deep-sea deployment of the KM3NeT neutrino telescope detection units by self-unrolling

The KM3NeT Collaboration: S. Aiello et al 

2020 JINST 15 P11027

https://doi.org/10.1088/1748-0221/15/11/P11027


New paper: Using convolutional neural networks for event reconstruction for ORCA

12 October 2020 – The KM3NeT Collaboration has published a new paper that aims at demonstrating the general applicability of deep convolutional neural networks to neutrino telescopes, using simulated datasets for the KM3NeT/ORCA detector as an example. To this end, the networks are employed to achieve reconstruction and classification tasks that constitute an alternative to the analysis pipeline presented for KM3NeT/ORCA in the KM3NeT Letter of Intent. They are used to infer event reconstruction estimates for the energy, the direction, and the interaction point of incident neutrinos. The spatial distribution of Cherenkov light generated by charged particles induced in neutrino interactions is classified as shower- or track-like, and the main background processes associated with the detection of atmospheric neutrinos are recognized. Performance comparisons to machine-learning classification and maximum-likelihood reconstruction algorithms previously developed for KM3NeT/ORCA are provided.

The conclusion is that this application of deep convolutional neural networks to simulated datasets for a large-volume neutrino telescope yields competitive reconstruction results and performance improvements with respect to classical approaches.

 

Event reconstruction for KM3NeT/ORCA using convolutional neural networks